BETAFPV Meteor65 Acro 1S Brushless Whoop Drone Frsky with 19500KV 0802 Motor BT2.0 Connector F4 1S Brushless FC Micro Tiny Whoop FPV Acro Whoop Drone

Add to wishlistAdded to wishlistRemoved from wishlist 0
Add to compare

$125.99

Category:



How to Bind to Meteor65 Frsky
1) Connect the drone with battery, then press the bind button. Receiver LED (green) is on, which means entering the binding mode.
2) Choose “BIND” in the transmitter.
3) Binding is successful when receiver

SPECIFICATION
Item: Meteor65 1S Brushless Acro Drone
Weight: 21.63g
Power: 1S
FC&ESC: F4 1S Brushless FC V2.1
Motors: 0802 19500KV Brushless Motors
Camera&VTX: M01 AIO Camera
Video System: NTSC
TVL: 600TVL
Antenna: RG178 Antenna
Angle: 25-35 degree(switchable)
Props: Gemfan 31mm 3-Blade 1.0mm Shaft Props
Receiver: Frsky FCC
Battery: BT2.0 300mAh 1S Lipo
Flight time: 3:30-4:00minutes

SEPCIFICATION OF FC&ESC
CPU: STM32F411CEU6 ( 100MHZ )
Six-Axis: MPU6000
Size: 29mm x 29mm, whoop mounting pattern
Firmware version: Betaflight MATEKF411RX (MK41R)
OSD: Built-in BetaFlight OSD
Built-in 1S ESC with 5A continuous and peak 6A current
SmartAudio is supported
Power supply: 1S
Support BLHeliSuite programmable
Factory firmware: O_L_5_REV16_6.HEX

Recommend parts:
F4 1S Brushless FC Frsky– www.amazon.com/dp/B07ZCSFH42
M01 AIO Camera — www.amazon.com/dp/B07X96YBJT
0802 19500KV Motor — www.amazon.com/dp/B07QWLS4QL
Meteor65 Frame Kit — www.amazon.com/dp/B081CJXCS1
BT2.0 300mAh 1S Lipo —- www.amazon.com/dp/B081C8LJHT
BT2.0 Cable Pigtail — www.amazon.com/dp/B081C5RLJ9
BT2.0-PH2.0 Adapter Cable — www.amazon.com/dp/B081CGRH4B
BT2.0 Connectors — www.amazon.com/dp/B081CFXCH8
BT2.0 Battery Charger Voltage Tester — www.amazon.com/dp/B081C9X3T5

Package:
1 * Meteor65 Acro Brushless Whoop Drone
2 * 300mAh 1S 30C Battery with BT2.0 connector
1 * BT2.0 Battery Charger and Voltage Tester
1 * Customized Carry Case
1 * Spare 31mm 3-blade props (1.0mm Shaft)
1 * Screwdriver

【BT2.0 Connector】The Meteor65 1S whoop drone comes with BETAFPV exclusive designed BT2.0 connector, which can support 9A continuous current and 15A burst while the PH2.0 connector just supports 4.5A continuous current. Solving the low voltage warning issue of PH2.0 connector on 1S brushless whoop when you start flying
【19500KV 0802 Motor&31mm Props】Equipped with 0802 19500KV motor, the KV value is lower than racing version, which makes the flight time up to 4min. Suitable for both indoor and outdoor flight for beginners
【F4 1S Frsky FC&M01 AIO Camera】BETAFPV newest and lightest F4 1S brushless FC and M01 AIO camera. It’s a perfect combo which has better performance on function for maximum weight savings
【Meteor65 Frame】New marvellous design with 3.2g ultra lightweight. Compared to previous 65mm brushless frames, motor mounting position uses triangle bilateral stretch structure, makes frame more aesthetic. With the low profile of battery slot height, the drone’s gravity center is reduced and improved the sense of compactness. It provides you more durable and smoother flight experience
【Package&Support】Meteor65 upgrade to a kit, it is with abundant accessories of 2 lipo batteries, BT2.0 charger & tester, extra props, 1 screwdriver and the portable bag. Any problem please contact us via Email support04@betafpv.com

User Reviews

0.0 out of 5
0
0
0
0
0
Write a review

There are no reviews yet.

Be the first to review “BETAFPV Meteor65 Acro 1S Brushless Whoop Drone Frsky with 19500KV 0802 Motor BT2.0 Connector F4 1S Brushless FC Micro Tiny Whoop FPV Acro Whoop Drone”

Your email address will not be published. Required fields are marked *

Do NOT follow this link or you will be banned from the site!
Tips and reviews on computers, drones, and more
Logo
Enable registration in settings - general
Compare items
  • Total (0)
Compare
0